idiotking

Jen and I were out walking the dog on our morning coffee route and we saw a bunch of signs in the neighborhood for an etate sale. I’m a sucker for a good estate sale, especially when there are tools to look at, so I suggested we get our coffee and go check it out. As we got closer to the gaggle of cars parked on the road, I realized it was at the house of my Scout friend Steve, who had regrettably passed on a number of years ago. Worried, we walked up the driveway and started looking over the stuff. I found one of the women running the sale and asked if his widow was OK and was relieved to hear she was fine, just cleaning out a bunch of stuff from the house.

In back up by the carriage house, his son’s Scout sat under a tarp, surrounded by tools and yard equipment. I spied a set of Scout panels and a neat bundle of chrome trim, and made a deal on it. It was all too big to carry home so we walked back and I picked up the car to head back over. While I was there I grabbed a set of Bonney box-end wrenches and a creeper, and then I spied a Straight Steer bar sitting on the floor under some other stuff. Walking back outside, Steve’s widow came out to say hello and we caught up a little bit. She mentioned he’d boxed up some other parts and she wanted to make sure they went to someone who could use them, so we traded numbers and I thanked her for coming out to say hello. I’m going to check in with Steve’s son to see if he wants any of the stuff I bought for his truck (she mentioned he’s actually considering selling it) but if not, I can definitely find someone who can use it.

The chrome trim is the big find here. They’re all in super-clean condition with only a little pitting; a soak in some Evaporust will clean up the mounting hardware on the back, and a polish will bring the shine back in the aluminum. I’ve already got two sets of fiberglas panels (one is cut to get between the hardtop and the roll bar) but this set is in fantastic shape.

Meanwhile, Jen got a call from Finn’s karate instructor, whose sister owns a Scout sitting forgotten under a tarp and who needs help getting it started. He wanted to know if it was OK for them to give me a call. They are such nice people and did such great stuff for Finn, I’d dig the truck out of a hole if they asked me to. So hopefully they’ll give me a ring sometime soon and we can see what the situation is there. I’m feeling a lot better about my skills now that I’ve revived two cars in the space of one year.

Cleaning up on Saturday evening, I left the boat tank in the back of the Red Bus with the fuel pump hooked up and forgot about it. Yesterday I went out to check on some rust converter I’d sprayed on the passenger floor and was hit with a strong smell of gasoline inside the cabin; it turned out that the heat on Sunday had expanded the tank and it dribbled out of the hose onto the rear bed. So I have to air the truck out for the next couple of weeks until the fumes dissipate, which is super annoying; the problem is that it soaked into the wooden floor in the back.

I got a small, heavy box in the mail yesterday with a handwritten return address on the top: the battery box I’d bought off Marketplace arrived safe and sound. It’s in fantastic shape: It’s covered in red primer but there’s only a little rust or corrosion on the inner platform; the rest is smooth and solid. I couldn’t be happier, because the one in the Red Bus is almost gone.

There’s also a spray of corrosion on the inside of the hood from where the original unsealed battery leaked and sprayed upwards onto the metal. So I’ll hit the remains of the old platform with more PBblaster and let it soak; the new metal will get a quick cleaning in the sandblasting cabinet and some new paint, and then go into the truck.

Meanwhile, talking with friends on the weekend, we had an inspiration. I texted my old friend Erick and asked if he was interested in doing some housecall IH work. He got back to me and said he was; I explained what I had and what I wanted to do, and left the ball in his court. We’ll see when it gets a little warmer if he can come out and do some engine and brake work to get her mobile.

Here’s a shot Bennett took before we really started tearing into the red bus.

I got started early on Saturday to prepare. First I humped all my tools outside and got the garage and the truck opened up. Then I organized all of the parts and tools and pulled the battery off the trickle charger. Then I pulled Autolite 303 plugs out of the Travelall and replaced them with a used set of 10,000 mile Autolite 85’s from my Scout. Feeling optimistic, I then swapped out the old ignition barrel with a new one I’d bought from RockAuto.

Brian showed up around eight, and we ran out to get coffee and donuts. Stephen and Bennett showed up a little after that, and we tried starting the truck—but nothing happened. Bennett began diagnosing what I’d done to bodge up the ignition system while Brian, Stephen and I began tearing out some of the useless mechanicals on the engine: the A/C system came out completely, the aftermarket cruise control was removed, and part of the trailer brake system. By noon we had the ignition problems sorted out and paused for some pizza and beer. Then we began diagnosing the starting problems.

The starter worked fine. We actually removed the passenger wheel and a bunch of the metal shielding along the inner fender to expose the starter and the engine stamping boss, and jumped the starter several times to chase down the electrical gremlins. When Bennett had the key sorted out we worked our way through the system with a tester to find the coil was OK but we weren’t getting spark to the plugs. I went around and swapped all the plug wires out with no change.

After a lot of tinkering, cleaning, and testing with the distributor we finally broke down and ran to the store for a new cap and rotor. We got the engine to catch several times but it didn’t run—we were frustrated at this point because we’d come so close. But the sun had gone down behind the house, the wind was picking up, the battery was running down, and it was getting cold, so we called it at about 5:30 and packed things up. I left the trickle charger on the battery to recover and packed things up.

We do have a few new discoveries: The engine is more than likely a 266, but we have no way of knowing for sure: there’s no stamping on the boss like there are in more modern SV engines. This one has a strange IH valve cover I’ve never seen—all the V8’s I’ve come across have four bolts. This one has two on the top and four on the bottom. And having pulled the valve cover off on the driver’s side, I have to say I’ve never seen a cleaner, newer looking valvetrain in my life. That’s VERY encouraging. More and more I think this was a municipal vehicle of some kind that was driven very sparingly, and then someone came along and built it into a summer camping vehicle. So the 40K miles on the odometer may be true mileage.

Either way, it was great to hang out with friends, spin wrenches and drink beer, and spend the day outside messing with old iron.

I got a bunch of goodies delivered for the Saturday workday: I picked up a fresh battery at the auto parts store, and Rock Auto dropped off a set of spark plug wires and a new ignition lock last night. Amazon delivered points, a condenser, and a carb rebuild kit. The spark plugs should be here sometime next week, which is kind of a bummer.

I also grabbed a new tub for all of the stuff I’ll be collecting as I work on the truck, and a pair of small plastic plugs to hopefully close off the two holes in the roof. The first thing I’ll probably tackle Saturday morning is replacing the ignition lock—provided the one they sent is the right size—and then pre-oiling the cylinders. Hopefully with Bennett’s help we can diagnose and get the rig running; I’ve got pretty much everything we’ll need.

I also got a bunch of helpful advice on the forums about some questions I had. The first big news is that the doors actually do lock—the whole mechanism is cleverly built into the handles. What you do is: get in, close the door, and push the handle down. That locks the door. Then you pull it up to unlock and unlatch the door. It’s a little inconvenient to have to lean in and lock the back doors, but it’s also kind of cool to not have visible locks. I also found instructions to get the doorhandles off: you basically pull the escutcheon back and push a pin out of the post, freeing up the handle for removal. Now I can pull all four door cards off and see what the door interiors and glass scissors look like.

Somebody also mentioned that my rear door latch was probably flipped, which would be the reason why it won’t latch, so I pulled it out of the door and looked it over. It’s not engineered the same way the tailgate latch on the Scout is (which lends itself to being spun internally, like overwinding a watch); it looks pretty much impossible to spin further than it’s supposed to go. So I replaced it and moved the latching post on the door outward as much as I could—and that did the trick. So now the rear barn doors close properly. I’ve got to pull one of the door handles off and figure out what lock barrels I need to replace all three locks on the same key.

Meanwhile the IH fridge in the garage is stocked with beer; I’ve got the engine resurrection toolkit collected on the workbench downstairs, and I have to put the new battery on the conditioner overnight. The boys should be arriving sometime around 9AM tomorrow, for which I’ll have warm coffee and donuts. I can’t wait to play with trucks!

Pumpkin Pickin’

About | Archives

Interesting…

Archives

Categories

Search

Instagram