Here’s where the bathroom at Bob’s stands. To recap, the Thompson Creek guys came and replaced the whole tub/shower section after I did all of the demo. I patched up the subfloor and put in 1/2″ tile backer board on the bare section last week, and we sourced and ordered new tile. I rented a tile saw up here and brought it with us to get the cuts done. I had to work fast to beat the clock due to a late start and Lowe’s getting the tile order wrong; After going back to exchange three boxes of the wrong tile with the right stuff, I got the floor marked off, some mastic mixed, and started laying it down. The tile saw wasn’t aligned properly so the first three cuts I made were off by 1/8″ over each foot, but once I sorted out the angle I made the cuts freehand and got it done. The other MVP was a little tile blade I bought when I did the backsplashes in the kitchen: they helped with the cuts around the toilet flange and small trim cuts elsewhere.

So the floor is in and curing. Next up will be floating all the grout to get things sealed in place. That shouldn’t take too long; following that I’ll set a vanity in place and putting some kind of moulding around the floor edge.