Well, we got through about 30 minutes of that hot mess before I had to leave the room, and Jen turned it off after that. I don’t know what to make of it other than that I don’t believe the pundits who say that Biden won, but neither do I believe that the Great Pumpkin won either. It was just an embarrassment. And Chris Wallace couldn’t keep order in a morgue.
I took advantage of a lazy Sunday afternoon to pull one of my two spare windshields out of the garage and throw it on some sawhorses. I’ve been hesitating on really digging in to the paint on the Scout until I get a firm date and commitment from my neighbor’s dad, so I thought I’d start on a windshield as a testing ground for new tools and my metal shaping skills until I can pin him down.
The tan windshield is the first one I bought, waaaaay back when I had Chewbacca, and I’ve been dragging it around with me ever since then. It came to me with no glass and a fair bit of rust, but the main panels weren’t in bad shape. I’d done some very light sanding years ago but stopped before I went farther than I was comfortable with. Today I put the flap wheel on an angle grinder, plugged into a podcast, and went to town on it.
The bottom edge is in much worse shape than the top, which I’d expect on any used windshield. Water collects inside the rubber gasket and eats away at the paint. There’s also rust on the bottom edges of the cowl where it sits on the top of the fender.
I went all the way around the edge of the windshield opening and cleaned both inside and out, and exposed as much of the bad metal as possible. Then I cleaned every other place I saw rust and was able to get about 90% of what I saw.
There are sections near the mounting bolts that I can’t get without a sandblaster, so that will probably be next on the list of tools to be purchased.
I covered everything visible with etching primer to keep it from flash rusting, and dragged windshield 2 out of the corner. This one came to me about 8 years ago, and it came with glass included.
On the surface it’s in better shape than the tan unit, but when you start looking closer, it gets ugly. A utility knife made short work of the windshield gasket, and once I’d made my way through that, the glass popped right out.
Both of the cowl edges are crispy.
When I move them both around, I hear the sound of rust and metal rattling around inside, so I know they’re both crispy inside as well; I’ve got a can of Eastwood Chassis encapsulator on deck for them both but I want to do some more investigation to see if I can access all of the interior through the holes I see.
So, next on the to-do list is to figure out what steel thickness I need for patch panels, summon my courage, and break out the cutting wheel on the tan windshield.
In November of last year I bought a set of wireless earbuds for my commute and quickly fell in love with them—so much so that I gave up almost entirely on wired headphones. The Anker Soundcore Life P2’s I bought were inexpensive and did 90% of what AirPods do at 1/4 the price tag. The only gripe I had with them was that using them to make calls was useless—they cancelled noise but didn’t allow me to hear myself talking, so I had the strange impression that I was shouting with my hands over my ears. Jen says I talk loud on the phone on a normal day, so this wasn’t an optimal solution. But 10 days of solid use between charges, dependable connectivity with my phone, and quality sound reproduction made up for that, and I was extremely happy with them.
A week ago I took Hazel for her morning walk and Jen came out to join me after we’d crossed the street. I took my earbuds out and stuffed them in my pocket so we could talk—but one must not have made it, because I returned home without it. Disappointed, I started looking at replacements, and I was sorely tempted by a new set of AirPods—especially the Pros, which feature Transparency Mode and make phone calls sound amazing. But realizing I hadn’t owned the Ankers for more than a year (I could have sworn it was longer) before one went missing, and given how much I use them, I weighed the cost of losing a $200 AirPod vs. a $70 Anker and went with the cheaper option. This time I got a pair of Soundcore Liberty Airs, which are supposed to be better for making calls, feature touchpads instead of physical buttons, and have a larger set of control options. They’re currently charging in the other room, and I can’t wait to try them out.
My bones are creaky this morning because Finn and I camped out in the Chic Shack last night. Before dinner I built a screen for the second window so we could open them both and have a little cross breeze, and that was just right until about 3AM when the temperature dropped. I put fuzzy blanket over Finn’s sleeping bag (and took a corner of it for myself) and fell back asleep. I would have slept sounder if I hadn’t needed to pee at 4AM, but oh, well.
+1, Recommend, Would book a stay again
The greenhouse is winding down from its peak this summer. I went out this morning and chopped most of the plants that are still producing way back and yanked four plants that have stopped producing out of their tubs. Most of the cherry plants are still producing fruit and some of it is reddening, but there’s a lot of green fruit out there that might not make it through the fall. My plan is to pull the plants out of the bins and hang them upside-down from the roof to send all the nutrients downward to the fruit before it gets too cold. There are two green heirlooms in the same situation; I’m hoping I can get those to ripen as well. Sadly it also means I’ve got to put the door back in place.
I donated to the Biden/Harris campaign last week, voluntarily opening the floodgates of spam campaign mail, and after hitting DONATE I realized I wanted to get a yard sign. Heading over to the store I saw that a 24″x18″ sign is $25, which is entirely too much money to spend on too small a sign. I had some 4×3′ plywood left over from the Chic Shack and I have an overhead projector, so I decided to make my own. It was easy to find a PDF of the campaign logo, and after I printed it on a transparency I busted out the projector and set it up in the living room facing the wall.
Once I had the stencil drawn, I cut it out on the production table and transfered it to the wood. I’d whitewashed the wood on Saturday so it was ready for paint. At Lowe’s I got two pint-sized samples of red and blue paint so I covered the red section and shot the blue through the stencil with the sprayer. When that had dried I masked off the red section with painter’s tape and brushed it on.
From there it was an easy matter of cutting some leftover wood down for yard spikes and pounding them into the lawn with a deadblow hammer. I have to go back out and straighten the west side sign a little bit, but overall I’m happy with the results. It’s right outside the office window so I get to see the neighborhood walk past every day.
Zero 7 (ft. José González): Today. It’s scientifically impossible to make the “samba” preset on a Casio keyboard sound good, but they somehow did it here.