Interesting…
Every six months or so, I look at the bins of antique computing hardware stored in the basement, and wonder whether I should continue to keep them, or pull the pin and recycle everything after wiping the drives. Then I stumble on an article like this one from the Harvard Law Library, and I feel better about having kept everything.
With digital storage there will always be two separate but equal battlefields of maintenance to consider: maintenance of the digital holdings and software environments in which they live, and the simple physical maintenance of the hardware and architecture that contain them.
It’s a really well-written and well-designed article, and worth reading if you nerd out on stuff like this. Now, to think about a secondary data backup for the server in the basement.
My Instagram feed has been suggesting videos of parts being turned on lathes for a couple of months now. They must know it’s the ASMR my brain needs to soothe itself. I’ve always been curious about how they work and fascinated by the engineering behind them; there’s so much to learn about tolerances and the math behind how to cut threads in bolts. One of the YouTube channels I follow just posted a video where he saved a professional lathe from being scrapped, got it back to his shop, and modified it to run on regular 120V house power vs. the three-phase it was built for. Along the way he shows how it works, explains some of the basic math behind its electrical requirements, rigs up a 120V motor and a three-way switch to make it work.
Once again, I am super jealous. I would LOVE to have a shop big enough to hold this and the time to learn how to use it properly.
In 2004, Jen and I had a choice to make. We were planning out our new kitchen, and we had to make the most of the space we had, as well as our money. I’d taken out a home equity loan to front the cash, so we were on a fixed budget, and that prevented us from doing the obvious thing, which was to blow out the wall between our dining room and the kitchen to open the space up. We worked with a kitchen planner and they helped us fit a set of cabinets into the space we’d inherited, but the critical choice we had to make was this: whether or not to sacrifice a cabinet for the radiator that was shoehorned under the existing rental-grade countertop. We decided, correctly, that storage was more important, and removed the radiator. But we’ve been living with the fallout of that decision ever since, and it’s never been more apparent than this past week of single-digit temperatures.
It sucks to be out there when it’s cold outside. To the point where Jen has turned the oven on just to stay warm while making food. Even when the radiator was there, it was never any great shakes; the kitchen is at the very end of the closed-circuit loop in our steam heating system, which means that it and the bedroom above get the least amount of heat last. But walking in there after just having gotten out of bed to get some coffee started is like walking through a snowbank; it sucks.
Contrast that with the Schluter radiant floor heat system we put in the master bath, which is like walking on a warm hug. In the morning, when the cats are freed from their prison (they sleep in the basement, otherwise they rattle the bedroom door and keep Jen up all night) they make a beeline for the bathroom and lay around up there all day. I can’t say I blame them; there have been days when I’ve wanted to shove them aside to take a nap.
Looking around the interwebs, I found a radiant floor retrofit kit for houses like ours, where the entire thing is essentially a roll-out mat sold in various lengths that are attached to a central 120V controller. You staple them to the joists under the floor with about 2″ of void space, and then tuck insulation up underneath. Something like this would go a long way to making things more livable out there, and we could move the big, bulky Edenpure heater my Mom gave us out of there for good.
Given that interest rates aren’t going down anytime again in my lifetime, and we’re going to need to make this dump more livable for the future, $2K in materials + electrician visit to hook it up wouldn’t be disagreeable.
Here’s a shot from in-camera of the STW taping last week.
